Linux & Hosting

Best Raspberry Pi 5 Kit for a Home Server (UK Picks)

Updated 9 November 2026

Small four-bay home NAS server with a drive tray removed, beside a wireless router on a wooden desk.

The best Raspberry Pi 5 kit for home server use in the UK combines a Raspberry Pi 5 8GB, an Argon ONE V3 M.2 NVMe case, an NVMe SSD and the official 27W USB-C power supply. It's a good setup for Pi-hole, Home Assistant and a small Docker stack. For transcoding, VMs or x86-only images, a mini PC is the better choice.

This guide draws on Raspberry Pi's product pages and power documentation, along with information from the Raspberry Pi Official Magazine, Tom's Hardware, Argon40 and Amazon UK listings.

Quick picks

  • Best all-round NVMe kit: Raspberry Pi 5 8GB + Argon ONE V3 M.2 NVMe case + WD Blue SN580 + official 27W PSU
  • Best two-drive NAS-lite: Argon ONE V5 Dual M.2 NVMe case
  • Best official-parts build: Raspberry Pi Case, M.2 HAT+ or SSD Kit, Active Cooler
  • Best for bigger Docker stacks: Raspberry Pi 5 16GB
  • Best metal case kit: GeeekPi metal case with N04 NVMe board and official Active Cooler
  • Skip: bundles with a non-PD or under-27W supply, EU-plug supplies, and Pi 4 boards that appear in Pi 5 searches

We may earn a commission if you buy through links on this page. It never changes our verdicts. How we review.

Raspberry Pi 5 8GB

Check price on Amazon

Argon ONE V3 M.2 NVMe case

Check price on Amazon

Raspberry Pi 27W USB-C Power Supply (UK plug)

Check price on Amazon

Server job to kit chooser

Server job Suggested RAM Storage Case pick Get a mini PC instead if...
Pi-hole or other DNS filter 4GB or 8GB microSD to start, NVMe later Raspberry Pi Case (B0CN5Q28TX) You also want several VMs
Home Assistant 8GB One NVMe Argon ONE V3 M.2 (B0CT2MDV2D) You need add-ons that only ship for x86
Nextcloud or file share 8GB One or two NVMe Argon ONE V5 Dual (B0DKWFMT1V) You need more than one PCIe lane of throughput
Light Jellyfin (direct play) 8GB One NVMe plus a USB drive Argon ONE V3 M.2 (B0CT2MDV2D) Your clients need transcoding
Docker stack (10+ containers) 16GB One NVMe GeeekPi N04 metal case and Active Cooler (B0CXP92CHG) You want Proxmox, VMs or x86-only images

According to Raspberry Pi, the Pi 5 comes with 1GB to 16GB of LPDDR4X RAM, two USB 3.0 ports and Gigabit Ethernet. It also has a PCIe 2.0 x1 interface, although you'll need an M.2 HAT or adapter to connect an NVMe drive.

Pi 5 vs N100 mini PC

Spec Raspberry Pi 5 N100/N150 mini PC (e.g. Beelink EQ14)
RAM ceiling 16GB, soldered 16GB in the EQ14 listing on our mini PC page
NVMe One PCIe 2.0 x1 lane via HAT or case board Two M.2 PCIe 3.0 slots (EQ14)
Images Arm64 only x86, so any Docker image or VM
Idle power 2.8W at the wall (Jeff Geerling) 6W (ServerRigs, via our mini PC page)

For more options, see our best mini PC for home server UK guide.

Bar chart of power draw in watts from named sources: Raspberry Pi 5 idle 2.8, Geekbench multicore 7.9, stress-ng 9.7, HPL 13.8 (Jeff Geerling), and Beelink EQ14 N150 mini PC idle 6 (ServerRigs). Checked 9 November 2026.

Build blocks: what each part does

Board. A 4GB Pi 5 is enough for a DNS filter. The 8GB version is a sensible middle ground for Home Assistant and a few containers, while 16GB makes more sense for larger stacks. Raspberry Pi says the Pi 5 will remain in production until at least January 2036.

Storage. A microSD card is fine for getting started. If the server will be writing data throughout the day, NVMe is the usual upgrade. Raspberry Pi's M.2 HAT+ supports 2230 and 2242 M key drives, with speeds up to 500 MB/s over PCIe 2.0. Argon cases support drives up to 2280.

Power. Raspberry Pi's documentation states that the Pi 5 supplies 1.6A to USB devices only when its power supply can deliver 5A at 5V. With any other supply, that limit drops to 600mA and USB boot is disabled. The official 27W supply provides 5.1V at 5A and is available with a UK (Type G) plug.

Cooling. Raspberry Pi says the Pi 5 "will perform best with active cooling". The official case includes a fan, while the Active Cooler is intended for bare boards and HAT stacks.

The picks

Raspberry Pi 5 8GB: the board for most servers

The Raspberry Pi Store listing on Amazon UK identifies this as model SC1112. It has a 2.4GHz quad-core Cortex-A76 processor, dual-band Wi-Fi and Gigabit Ethernet with PoE+ support, although PoE+ needs a HAT. The listing also includes a 1-year warranty and recommends the 27W power supply.

Who it's for: most home servers.

Who it isn't for: VM hosts or transcoding.

Watch out: the listing showed low stock on 9 November 2026.

Check price on Amazon

Raspberry Pi 5 16GB: for bigger Docker stacks

This is the same board with 16GB of RAM (model SC1113). On 9 November 2026, the Amazon listing was sold by CreativeMind Products, a third-party seller, and dispatched by Amazon.

Who it's for: ten or more containers, or a Nextcloud with many users.

Who it isn't for: a Pi-hole box, where 8GB is plenty.

Check price on Amazon

Argon ONE V3 M.2 NVMe case: best all-round case

Argon40 describes the V3 as an aluminium case with an M.2 NVMe base that accepts M key drives up to 2280. It includes a drive heatsink, a 30mm PWM fan, a rear power button, two full-size HDMI ports and an IR receiver. A jumper lets the Pi boot automatically after a power cut.

Argon publishes a list of drives it reports as compatible. These include the official Raspberry Pi SSD, WD Blue SN580 and Samsung 980.

Who it's for: a tidy single-drive server.

Who it isn't for: two-drive storage.

Argon ONE V3 M.2 NVMe case

Check price on Amazon

WD Blue SN580 1TB NVMe

Check price on Amazon

Argon ONE V5 Dual M.2: best two-drive NAS-lite

The Raspberry Pi Official Magazine describes the V5 as "an absolute unit". It has room for two M.2 NVMe drives up to 2280, which the magazine says makes it a NAS with SSD RAID capability.

Argon40 says the cast aluminium case is the heatsink for passive cooling, with the 30mm PWM fan for intense workloads. Tom's Hardware measured about 35 degrees at idle, and a stress test that stayed just under the 55 degree point where the fan starts. The V5 has no IR receiver, according to the LibreELEC Argon ONE thread.

Who it's for: a mirrored pair of SSDs for files.

Who it isn't for: anyone expecting twice the speed. Both drives still share the Pi 5's single PCIe lane.

Check price on Amazon

Official-parts build: case, M.2 HAT+, SSD Kit and Active Cooler

If you'd rather stick to Raspberry Pi's own components, the Raspberry Pi Case clips together and includes a fan. The M.2 HAT+ provides a single NVMe slot.

The SSD Kit combines the HAT with a Raspberry Pi NVMe SSD. Its listing specifies 50k/90k IOPS for 4kB random read/write operations on the 512GB drive.

Who it's for: buyers who want parts from one maker.

Who it isn't for: 2280 drives, which won't fit the HAT+.

Watch out: Raspberry Pi says the M.2 HAT+ Compact, which supports 2230 drives only, is the version designed for the official case. On 9 November 2026, the Active Cooler listing showed low stock from a third-party seller, while the SSD Kit had no stock status displayed.

Raspberry Pi Case for Raspberry Pi 5

Check price on Amazon

Raspberry Pi M.2 HAT+

Check price on Amazon

Raspberry Pi SSD Kit 512GB

Check price on Amazon

Raspberry Pi Active Cooler

Check price on Amazon

GeeekPi metal case with N04 and official Active Cooler

The GeeekPi listing includes a metal case, an N04 M.2 Key-M NVMe board for 2230, 2242, 2260 and 2280 drives, the official Raspberry Pi 5 Active Cooler, an FPC cable, a screwdriver and a screw pack. GeeekPi's listing says the kit is compatible with the Raspberry Pi 5 4GB and 8GB. It does not include a Raspberry Pi 5 board, an M.2 NVMe SSD or a power adapter. The official 27W PSU is sold separately.

Who it's for: a single order for the metal case, N04 board and official Active Cooler.

Who it isn't for: anyone who wants a power supply in the same order.

Sometimes sold via Amazon Global Store; check import charges at checkout.

Check price on Amazon

Running cost: 24/7 at the Ofgem cap

Running costs use the same calculation as our mini PC page: watts x 24 x 365 / 1,000 x unit rate.

Using the October to December 2026 Ofgem price cap of 26.32p per kWh, the yearly costs are:

  • Pi 5 idle, 2.8W (Jeff Geerling): 24.53kWh, about £6.46 a year
  • Pi 5 at full stress-ng load, 9.7W: 84.97kWh, about £22.36 a year
  • Beelink EQ14 idle, 6W (ServerRigs): about £13.83 a year

A user on the Pimoroni forum also reports around 2.75W at idle with an NVMe base fitted. Prices last checked: 9 November 2026.

What to run first

Start with one service and add more once backups work.

The Docker Compose basics guide explains how to manage a stack, while secure a Linux server covers SSH and updates. Backups that restore covers the part most people skip.

If you're new to self-hosting, start with self-hosting: getting started. When you're ready to set up HTTPS, see Caddy as a reverse proxy.

FAQ

Is a Raspberry Pi 5 good enough for a home server?

Yes, for Pi-hole, Home Assistant, file sharing and a modest Docker stack. If you need transcoding, VMs or x86-only software, a mini PC is a better fit.

Raspberry Pi 5 or N100 mini PC?

The Pi has lower idle power consumption, at 2.8W compared with about 6W in the sources above. The mini PC supports x86 images and offers more NVMe lanes.

Do I need an NVMe SSD or is a microSD card OK?

A microSD card is fine when starting out. For workloads that write constantly, such as databases, the usual upgrade is an NVMe drive connected through a HAT or case board.

Which NVMe SSDs work with the Pi 5?

Argon's reported compatibility list for the V3 case includes the Raspberry Pi SSD, WD Blue SN580 and Samsung 980. The official M.2 HAT+ supports only 2230 and 2242 drives.

Does the Pi 5 need the official 27W power supply?

Not strictly. However, Raspberry Pi says USB devices are limited to 600mA unless the power supply can deliver 5A at 5V. Most phone chargers increase voltage rather than current.

8GB or 16GB for Docker, Home Assistant or Jellyfin?

8GB is enough for most single-purpose servers. For ten or more containers, go with 16GB.

As an Amazon Associate I earn from qualifying purchases.